PLease, I am still getting emails to this location (rsementi@hotmail.com) -
Your last email indicated that this email address was to be removed from the
list, however I am still getting Europa Digest emails here.
>From: Europa-List Digest Server <europa-list@matronics.com>
>Reply-To: europa-list@matronics.com
>To: Europa-List Digest List <europa-list-digest@matronics.com>
>Subject: Europa-List Digest: 9 Msgs - 05/15/06
>Date: Mon, 15 May 2006 23:56:37 -0700
>
>*
>
> ==================================================
> Online Versions of Today's List Digest Archive
> ==================================================
>
>Today's complete Europa-List Digest can also be found in either of the
>two Web Links listed below. The .html file includes the Digest formatted
>in HTML for viewing with a web browser and features Hyperlinked Indexes
>and Message Navigation. The .txt file includes the plain ASCII version
>of the Europa-List Digest and can be viewed with a generic text editor
>such as Notepad or with a web browser.
>
>HTML Version:
>
>
>http://www.matronics.com/digest/europa-list/Digest.Europa-List.2006-05-15.html
>
>Text Version:
>
>
>http://www.matronics.com/digest/europa-list/Digest.Europa-List.2006-05-15.txt
>
>
> ================================================
> EMail Version of Today's List Digest Archive
> ================================================
>
>
> ----------------------------------------------------------
> Europa-List Digest Archive
> ---
> Total Messages Posted Mon 05/15/06: 9
> ----------------------------------------------------------
>
>
>Today's Message Index:
>----------------------
>
> 1. 08:23 AM - MG Hangar (Jim Butcher)
> 2. 01:07 PM - interior kit (Paul Stewart)
> 3. 01:14 PM - Re: Steel nose wheel springs (Jac van Heeswijk)
> 4. 01:14 PM - Re: Steel nose wheel springs (Jac van Heeswijk)
> 5. 01:22 PM - Re: interior kit (Dave_Miller@avivacanada.com)
> 6. 02:49 PM - Re: Interior kit (rlborger)
> 7. 04:28 PM - Re: Re: Interior kit (Duncan McFadyean)
> 8. 09:15 PM - Re: Steel nose wheel springs (Cliff Shaw)
> 9. 09:15 PM - Re: interior kit (Cliff Shaw)
>
>
>________________________________ Message 1
>_____________________________________
>
>
>From: "Jim Butcher" <europa@triton.net>
>Cc: "Tom Rent" <tmrent@charter.net>
>Subject: Europa-List: MG Hangar
>
>
>Working on our MG wings, we have begun to realize how long they really =
>are. And flying our short wings we realize how convenient it is to go =
>to the airport and fly, without having to rig the wings. The hangar we =
>rent has a 40 ft door and the MG configuration will not fit, even at an =
>angle or with the wing tips removed.
>
>At the SSA convention this winter we saw a small hangar design by =
>Ensign. The idea is a small hangar suitable for an assembled sailplane. =
> The hangar is purposely made as small as possible with the center =
>section only being 6 ft tall and the sections over the wings being only =
>4 ft tall. The entire front of the hangar is a door making it easy to =
>put the glider into the hangar. Intrigued, I asked about modifying the =
>hangar to fit a Europa MG. Ensign has responded with a revised design =
>which will accommodate the assembled MG as well as providing space to =
>store the short wings (and also space to store the MG wings if you are =
>flying the short wings).
>
>If you are interested, I have a pdf of the proposed design. More =
>information on the sailplane hangar is at www.ensignhangars.com. I have =
>worked with Tom Rent of Stanton Sport Aviation, Stanton, MN =
>952-435-2792, email tmrent@charter.net . You can see the installation =
>process at Stanton, MN at =
>http://users.goldengate.net/~tmrent/ensign/ensign1.htm
>
>We wanted to share what looks like a nice solution for housing the MG =
>Europa.
>
>Jim & Heather Butcher
>
>
>________________________________ Message 2
>_____________________________________
>
>
>From: Paul Stewart <europa@pstewart.f2s.com>
>Subject: Europa-List: interior kit
>
>
>Anyone seen or got pics of the factory interior kits now being
>advertised on the back of europa flyer?
>
>REgards
>
>Paul Stewart
>
>G-GIDY
>
>
>________________________________ Message 3
>_____________________________________
>
>
>From: "Jac van Heeswijk" <jac.vanheeswijk@hetnet.nl>
>Subject: Re: Europa-List: Steel nose wheel springs
>
><jac.vanheeswijk@hetnet.nl>
>
>Alan, I am sorry to tell you that I can't help you. I just had 5 pairs of
>springs left. They were gone within an hour after I posted my email.
>
>Despite that: Happy building. Jack
>
>
>----- Original Message -----
>From: "Alan Burrows" <alan@kestrel-insurance.com>
>Sent: Sunday, May 14, 2006 12:34 AM
>Subject: Re: Europa-List: Steel nose wheel springs
>
>
> > <alan@kestrel-insurance.com>
> >
> > Hi Jack
> >
> > I would like a set of your springs if you have any left.Just let me know
> > where and to send the money.
> >
> > Many Thanks
> >
> > Alan
> >
> >>
> >
> >
> > --
> >
> >
>
>
>________________________________ Message 4
>_____________________________________
>
>
>From: "Jac van Heeswijk" <jac.vanheeswijk@hetnet.nl>
>Subject: Re: Europa-List: Steel nose wheel springs
>
><jac.vanheeswijk@hetnet.nl>
>
>Gary, I am sorry to tell you that I can't help you. I just had 5 pairs of
>springs left. They were gone within an hour after I posted my email.
>
>Despite that: Happy building. Jack
>
>----- Original Message -----
>From: "Gary Leinberger" <Gary.Leinberger@millersville.edu>
>Sent: Saturday, May 13, 2006 1:43 AM
>Subject: RE: Europa-List: Steel nose wheel springs
>
>
> > <Gary.Leinberger@millersville.edu>
> >
> > I tale a pair - how can we arrange payment?
> >
> > Gary Leinberger
> > A237
> > Lancaster, PA
> > USA
> >
> > ________________________________
> >
> > From: owner-europa-list-server@matronics.com on behalf of Jac van =
> > Heeswijk
> > Sent: Fri 5/12/2006 3:17 PM
> > To: europa-list@matronics.com
> > Subject: Europa-List: Steel nose wheel springs
> >
> >
> > <jac.vanheeswijk@hetnet.nl>
> >
> > The Factory Tech Talk page in the March edition of the Europa Flyer
> > describes the substitution of the nose leg bungee by two metal springs.
>=
> >
> > This modification was initiated in the Netherlands by Nico Groot and in
>=
> >
> > the meantime several dutch builders have applied it in their trigears. =
> >
> > These springs were developed and made by the same dutch factory and they
>=
> >
> > were also used by Ian Rickard in his PFA approved mod nr. 71.
> >
> >
> > Might any builder want a set of these springs for immediate delivery, I
>=
> >
> > have ordered 10 pairs at the factory in order to save on machine
> > installation expenses. This way I have now 6 pairs left at the cost
> > price of 100,00 Euro (GBP 67,00 - US$ 125,00) a pair plus shipment
> > (priority shipment to Canada was 30 Euro last week, USA will be about =
> >
> > the same, England ??).
> >
> >
> > I don't want to make a profit, just maybe an investment in some
> > prospective friends. One of these days I will be shipping some pairs to
>=
> >
> > England (Lincolnshire). For 3 or 4 people this is a chance to get a pair
>=
> >
> > without delay at a cheap price. First in first out. If somebody is
> > interested let him take contact with me. Email works best!
> >
> >
> > Jack van Heeswijk, the Netherlands (394, almost flying)
> >
> >
> > =
> >
> > =
> >
> > =
> >
> > =
> >
> >
> > --
> >
> >
>
>
>________________________________ Message 5
>_____________________________________
>
>
>Subject: Re: Europa-List: interior kit
>From: Dave_Miller@avivacanada.com
>
>
>I'd be interested in comments regarding the comfort of the seats. The
>seats I made up myself could use some improvement, so I'm considering
>replacing them.
>
>Dave A061
>
>
>Paul Stewart <europa@pstewart.f2s.com>
>Sent by: owner-europa-list-server@matronics.com
>05/15/2006 04:03 PM
>Please respond to europa-list
>
>
> To: "europa-list@matronics.com" <europa-list@matronics.com>
> cc:
> Subject: Europa-List: interior kit
>
>
>Anyone seen or got pics of the factory interior kits now being
>advertised on the back of europa flyer?
>
>REgards
>
>Paul Stewart
>
>G-GIDY
>
>
>________________________________ Message 6
>_____________________________________
>
>
>Cc: rlborger <rlborger@mac.com>
>Subject: Europa-List: Re: Interior kit
>From: rlborger <rlborger@mac.com>
>
>
>Paul,
>
>I have been sent a set of pic of the interior kit. I will post them
>on my build web site. I was going to wait until I had received my
>interior kit to take direct pics and post those, but I guess I can
>post these until I have mine.
>
>Good building and great flying,
>Bob Borger
>Europa Kit #A221 N914XL, XS Mono, Intercooled 914, Airmaster C/S
>http://www.europaowners.org/N914XL
>(85%) tail kit done, wings closed, cockpit module installed, pitch
>system in, landing gear frame in, rudder system in, outrigger mod in,
>Fuselage Top on, lift/drag/flap pins in, wing incidence set, tie bar
>in, flap drive in, Mod 70 done. Baggage bay in. Working in - 24
>Instrument Panel, 25 Electrical, 28 Flaps, 29 Main Gear, 30 Fuel
>System, 32 Tail, 34 Door Latches & 35 Doors, 37 Finishing. Airmaster
>arrived 29 Sep 05. Seat arrived from Oregon Aero. Preparing ROTAX
>914 for installation.
>3705 Lynchburg Dr.
>Corinth, TX 76208
>Home: 940-497-2123
>Cel: 817-992-1117
>
>
>________________________________ Message 7
>_____________________________________
>
>
>From: "Duncan McFadyean" <ami@mcfadyean.freeserve.co.uk>
>Subject: Re: Europa-List: Re: Interior kit
>
><ami@mcfadyean.freeserve.co.uk>
>
>Bob,
>I'd be very interested to hear the what the weight of your kit is (when it
>arrives). Could you weigh it please.
>
>Duncan McF.
>----- Original Message -----
>From: "rlborger" <rlborger@mac.com>
>Cc: "rlborger" <rlborger@mac.com>
>Sent: Monday, May 15, 2006 10:45 PM
>Subject: Europa-List: Re: Interior kit
>
>
> >
> > Paul,
> >
> > I have been sent a set of pic of the interior kit. I will post them
> > on my build web site. I was going to wait until I had received my
> > interior kit to take direct pics and post those, but I guess I can
> > post these until I have mine.
> >
> > Good building and great flying,
> > Bob Borger
> > Europa Kit #A221 N914XL, XS Mono, Intercooled 914, Airmaster C/S
> > http://www.europaowners.org/N914XL
> > (85%) tail kit done, wings closed, cockpit module installed, pitch
> > system in, landing gear frame in, rudder system in, outrigger mod in,
> > Fuselage Top on, lift/drag/flap pins in, wing incidence set, tie bar
> > in, flap drive in, Mod 70 done. Baggage bay in. Working in - 24
> > Instrument Panel, 25 Electrical, 28 Flaps, 29 Main Gear, 30 Fuel
> > System, 32 Tail, 34 Door Latches & 35 Doors, 37 Finishing. Airmaster
> > arrived 29 Sep 05. Seat arrived from Oregon Aero. Preparing ROTAX
> > 914 for installation.
> > 3705 Lynchburg Dr.
> > Corinth, TX 76208
> > Home: 940-497-2123
> > Cel: 817-992-1117
> >
> >
> >
>
>
>________________________________ Message 8
>_____________________________________
>
>
>From: "Cliff Shaw" <flyinggpa@comcast.net>
>Subject: Re: Europa-List: Steel nose wheel springs
>
>
>I called Europa04 and ordered my springs Mod 71.
>
>Cliff Shaw
>1041 Euclid ave.
>Edmonds, WA 98020
>425 776 5555
>http://www.europaowners.org/WileE
>
>
> ----- Original Message -----
> From: Jac van Heeswijk
> To: europa-list@matronics.com
> Sent: Monday, May 15, 2006 1:14 PM
> Subject: Re: Europa-List: Steel nose wheel springs
>
>
><jac.vanheeswijk@hetnet.nl>
>
> Gary, I am sorry to tell you that I can't help you. I just had 5 pairs =
>of
> springs left. They were gone within an hour after I posted my email.
>
> Despite that: Happy building. Jack
>
> ----- Original Message -----
> From: "Gary Leinberger" <Gary.Leinberger@millersville.edu>
> To: <europa-list@matronics.com>
> Sent: Saturday, May 13, 2006 1:43 AM
> Subject: RE: Europa-List: Steel nose wheel springs
>
>
> > <Gary.Leinberger@millersville.edu>
> >
> > I tale a pair - how can we arrange payment?
> >
> > Gary Leinberger
> > A237
> > Lancaster, PA
> > USA
> >
> > ________________________________
> >
> > From: owner-europa-list-server@matronics.com on behalf of Jac van =
>
> > Heeswijk
> > Sent: Fri 5/12/2006 3:17 PM
> > To: europa-list@matronics.com
> > Subject: Europa-List: Steel nose wheel springs
> >
> >
> >
> > <jac.vanheeswijk@hetnet.nl>
> >
> > The Factory Tech Talk page in the March edition of the Europa Flyer
> > describes the substitution of the nose leg bungee by two metal =
>springs.
> >
> > This modification was initiated in the Netherlands by Nico Groot and =
>in
> >
> > the meantime several dutch builders have applied it in their =
>trigears.
> >
> > These springs were developed and made by the same dutch factory and =
>they
> >
> > were also used by Ian Rickard in his PFA approved mod nr. 71.
> >
> >
> > Might any builder want a set of these springs for immediate =
>delivery, I
> >
> > have ordered 10 pairs at the factory in order to save on machine
> > installation expenses. This way I have now 6 pairs left at the cost
> > price of 100,00 Euro (GBP 67,00 - US$ 125,00) a pair plus shipment
> > (priority shipment to Canada was 30 Euro last week, USA will be =
>about
> >
> > the same, England ??).
> >
> >
> >
> > I don't want to make a profit, just maybe an investment in some
> > prospective friends. One of these days I will be shipping some pairs =
>to
> >
> > England (Lincolnshire). For 3 or 4 people this is a chance to get a =
>pair
> >
> > without delay at a cheap price. First in first out. If somebody is
> > interested let him take contact with me. Email works best!
> >
> >
> >
> > Jack van Heeswijk, the Netherlands (394, almost flying)
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > --
>11-5-2006
> >
> >
>
>
> =
>=
>
> =
>=
>
> =
>=
>
> =
>=
>
>
>________________________________ Message 9
>_____________________________________
>
>
>From: "Cliff Shaw" <flyinggpa@comcast.net>
>Subject: Re: Europa-List: interior kit
>
>
>Dave
>
>Try these people. http://www.oregonaero.com/
>
>I helped them fit some prototypes a year ago. What they had looked good. =
>I made my own using there ideas and love them.
>
>Cliff Shaw
>1041 Euclid ave.
>Edmonds, WA 98020
>425 776 5555
>http://www.europaowners.org/WileE
>
>
> ----- Original Message -----
> From: Dave_Miller@avivacanada.com
> To: europa-list@matronics.com
> Sent: Monday, May 15, 2006 1:21 PM
> Subject: Re: Europa-List: interior kit
>
>
> I'd be interested in comments regarding the comfort of the seats. The
> seats I made up myself could use some improvement, so I'm considering
> replacing them.
>
> Dave A061
>
>
> Paul Stewart <europa@pstewart.f2s.com>
> Sent by: owner-europa-list-server@matronics.com
> 05/15/2006 04:03 PM
> Please respond to europa-list
>
>
> To: "europa-list@matronics.com" =
><europa-list@matronics.com>
> cc:
> Subject: Europa-List: interior kit
>
>
><europa@pstewart.f2s.com>
>
> Anyone seen or got pics of the factory interior kits now being
> advertised on the back of europa flyer?
>
> REgards
>
> Paul Stewart
>
> G-GIDY
>
>
> =
>=
>
> =
>=
>
> =
>=
>
> =
>=
>
>
|