In a message dated 15/04/2006 01:05:12 GMT Daylight Time,
EuropaXSA276@aol.com writes:
Has anyone had issue with the clearance of the shoot bolt guides as
described
above? Fix?
Certainly have - and the problem of the guides coming loose from time to
time. This last seems to be due to the long aft shoot bolt not entering the
guide at a perfect angle but bearing on one side. A slight bend in the long
bolt
seems to have cured this
I have removed a small amount of from the rear of the door material to set
the guide further forward and then fixed it into position with two part and a
considerable build up of material around the guide.
No problems for some time now so hope this is a permanent solution.
Patrick
|