My solution to the same problem was to weld the metal backing washers to the
nuts on the friction pivot.
That way the friction washers do their job. Otherwise they don't and the nut
turns on the backing washer.
Duncan McF
----- Original Message -----
From: "scrimm" <steve.crimm@stephenscott.com>
Sent: Monday, March 20, 2006 12:40 AM
Subject: Europa-List: Throttle friction - the lack of
>
> I need to stop my throttle from creeping. Whether on the ground or in
> flight it wants to advance forward. Most of the throttle related posts
> that I have read are about stiff or sticky throttle cables. Mine is just
> the opposite.
>
> Any suggestions would be appreciated.
>
> Steve Crimm
> N42AH
> A058
> ----------------
>
>
>
|