Ferg,
Check out my build site (signature block). Go to Year #3, Q1 2004,
page 3. About half way down you should see pics of my brake caliper
and line assembled. See if this is what you have. Perhaps you can
see any bit that's missing. Like that little elbow maybe?
I hope this helps.
Good building and great flying,
Bob Borger
Europa Kit #A221 N914XL, XS Mono, Intercooled 914, Airmaster C/S
http://www.europaowners.org/N914XL
(85%) tail kit done, wings closed, cockpit module installed, pitch
system in, landing gear frame in, rudder system in, outrigger mod in,
Fuselage Top on, lift/drag/flap pins in, wing incidence set, tie bar
in, flap drive in, Mod 70 done, baggage bay in. Completing the
firewall-aft fuel system and fitting the instrument panel. Working
in - 24 Instrument Panel, 25 Electrical, 28 Flaps, 29 Main Gear, 30
Fuel System, 32 Tail, 34 Door Latches & 35 Doors, 37 Finishing.
Airmaster arrived 29 Sep 05. Seat arrived from Oregon Aero.
Preparing ROTAX 914 for installation.
3705 Lynchburg Dr.
Corinth, TX 76208
Home: 940-497-2123
Cel: 817-992-1117
|