Or Kelvin! :-)
Dave - the few bits I've done so far cured overnight to a sandable state -
no different to Ampreg and glass, flox or micro.
Cheers,
Jeremy
Jeremy Davey
Europa Monowheel 537M G-EZZA
Europa Club Vice-Chairman, Webmaster, PFA NC Representative
PFA EC Member
If you can keep your head when all about you are losing theirs, then it is
possible you haven't grasped the severity of the situation.
Tail done
Standard XS wings with mods underway
CM installed in fuse (with airbrakes fittings)
1350 build hours to date
Intended fit:
Rotax 914 turbo, Airmaster CS fully-feathering prop
Lots of lights, buttons, switches, gizmos, and alarms
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Rick Audy
Subject: RE: Europa-List: Finishing
I sure hope that is Celsius (a reasonable temperature) and not farenheit.
Rick
>Just started filling and finishing the fuselage joint etc with expancell
>mixed as required in the manual. Seems to be taking a long time to harden,
>is this usual, how long have you had to wait before sanding. Humidity 40%
>Temp average 22 deg.
>Regards Dave Park
|