Just make sure the leads cant vibrate as this will cause fluctuations in the
readings especially if you are using digital instruments. WE had a problem
with this about 6 months ago.
Played havoc with the readings till we found the cause.
----- Original Message -----
From: "Sidsel & Svein Johnsen" <sidsel.svein@oslo.online.no>
Subject: Re: Europa-List: Oil temp sender: Cable terminal?
> <sidsel.svein@oslo.online.no>
>
> Thank you, all, for the replies. How can such an apparently intricate
> "thing" have such a simple solution?! My thought was to use such a
> standard
> female connector, which I would probably have done if it were in my boat,
> but it just looked so out-of-place on that fancy sender end, and in an
> airplane. Anyway, the simpler, the better - just hope the connector stays
> on when the engine vibrates.
>
> Again, thank you very much!
>
> Regards,
> Svein
> A225 - XS Trigear - now in Norway
>
>
>
|