>
> It appears that a suitable point would be to fit the ball link to one
> of
the
> hinge arms (FL16), drilling the small diameter hole for it in the
> centre line of the hinge arm as close as possible to the fuselage
> floor. This should give the desired 90 degree rotation of the sensor.
> - Other suggestions?
Alternatively, if you have a monowheel, you can use a microswitch on the
gear lever to select one of two resistors. This has the same effect as
the potentiometer but as the mono only has 'up' or 'down' you only need
two settings.
Tony
|