Hi,
The following error is also displayed in AutoCAD 2002 (PC):
Invalid block name M/C
Invalid or incomplete DXF input -- drawing discarded.
However the file on the CD opens no problem in Microstation v8.1 which
allowed me to save it as dwg, etc for anyone who wants another format.
Regards,
Paul
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of G-IANI
Subject: RE: Europa-List: Auto CAD file?
The drawing ga.dxf may have problems. I can open it with M/S Digital
image pro. I cannot open it with Autocad Lite (2000) or Irfanview.
Both of these report a corrupt or invalid header. This may be an
"Apple" problem. If Roland has access to the original (or we can ask
Roger at Europa for another
copy) I will be happy to convert it to DXF and test it with a range of
programs.
I have the trigear version of the same drawing as a DWG (autocad format)
and can turn this into a DXF if this helps.
Ian Rickard #505 G-IANI
Europa Club Assistant Mods Rep, (2000 hours building) very nearly ready
to fly e-mail mods@europaclub.org.uk
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com]On Behalf Of Rowland
Carson
Subject: Re: Europa-List: Auto CAD file?
>Does anyone have an accurate rendering of the XS monowheel in profile
>in an Auto CAD file
Steve - there is a file called ga.dxf on the Europa Club CD-ROM ------
regards
Rowland
--
| Rowland Carson Europa Club Membership Secretary
| Europa 435 G-ROWI (660 hours building) PFA #16532
| e-mail <memsec@europaclub.org.uk> website <www.europaclub.org.uk>
=
==
direct advertising on the Matronics Forums.
==
==
==
|