on 11/23/03 11:45 PM, Cliff Shaw at flyinggpa@comcast.net wrote:
>
> Jeff
>
> What I did was to grind off a small amount of the plex around the edge. Just
> a little to ; 1) make a tooth for the filler 2) reduce the amount of height
> the filler had to fair. Then fill as normal with the stuff that came in the
> kit.
>
> Cliff Shaw
> 1041 Euclid ave.
> Edmonds WA 98020
> (425) 776-5555
> N229WC "Wile E Coyote"
> New Email:" flyinggpa@comcast.net "
>
> ----- Original Message -----
> From: "Jeff Roberts" <jeff@rmmm.net>
> To: "Matronics Lists" <europa-list@matronics.com>
> Subject: Europa-List: Plexiglas to the door?
>
>
>>
>> What a weekend, connected all brake lines and the Matco brake. Plus bonded
>> the port & starboard Plexiglas into the doors. Would like to know what
>> others have done to smooth the transition of door to glass. The glass
> seams
>> just slightly proud of the door. Should I just fill & sand up to the edge
> of
>> the Plexiglas, or has someone got a better idea? Can the very edge of the
>> glass be sanded down to match?
>>
>> Thanks in advance,
>>
>> Jeff
>> A258 Tri
>> Airframe really looks like a plane now!
>>
>>
>
>
>
>
>
>
Cliff
That was what I thought. Thanks for confirming.
Jeff A258
|