Wasnt it mentioned latex gloves are permeable to the irritant or is this
just the case for pvc based disposible gloves??
Cheers
Paul.
Paul Sweeting
Europa XS Monowheel 558
-----Original Message-----
From: Jeremy Davey [mailto:jeremycrdavey@btinternet.com]
Subject: RE: Europa-List: Sticky pre-skinned surfaces
<jeremycrdavey@btinternet.com>
John,
All my Stage 1 components have this to one extent or other. Indeed, at the
time we went into it in great depth with the factory and SP Systems (who
make the resin). Apparently it is a result of contaminants emerging from the
resin and reacting with water out of the atmosphere (which is exacerbated by
slow hardener being used and tallies with your weather report) and will need
to be cleaned up prior to finishing. It is not of structural significance.
Having said it is not structurally significant, it is worth taking
precautions for the sake of your health when handling these (and all)
layups. I generally wear latex gloves when handling cured layups, or wash my
hands promptly afterwards. I do not want to acquire an allergy for the sake
of a few hundred disposable gloves and a little care.
Regards,
Jeremy
Jeremy Davey
Europa XS Monowheel 537M G-EZZA
The contents of this email and any attachments are sent for the personal
attention
of the addressee(s) only and may be confidential. If you are not the intended
addressee, any use, disclosure or copying of this email and any attachments is
unauthorised - please notify the sender by return and delete the message. Any
representations or commitments expressed in this email are subject to contract.
ntl Group Limited
|