Also try bob jacobsen's website at http://www.galaxyhobby.com . The 2"x6"
cutout style
tab has become very common.
Shaun
A207
----- Original Message -----
From: <tonyk@kaon.co.nz>
Subject: Re: Trim tab servo installation
> . I've read most of the old posts on the subject, but if you
> > have
> > any pictures please E-mail them to me.
>
>
> Have a look through my website at www.kaon.co.nz/europa. I can't remember
which
> month I built the trim tab but there are complete build photos there.
>
> I used the MAC (RAC!) S9
>
> Tony
>
|