>Reply to John Moran:
>You are right, there is a conflict in that the seat belt bolt is behind the
>pulley, which is a niusance. IMHO it might be better if the plate was larger,
>then the spacers wouldn't be needed and the rudder cable would be closer to the
>side of the console. Easier then to bury them in nylon tube bonded to the
>structure.
I plan to avoid the rudder cable conflict problem(s) by routing them in
teflon lined bowden cable (using motorcycle rear brake cable stock) as far
aft as the rear cabin bulkhead.
Miles
|