The most useful tip I have picked up from another Europa builder is to
place a large board against the wall and pin all the packets too it.
When you are past the sticky stage and are on to the nutty bolty stage
you can waste oodles of time scrabbling around for the right bits with
their wacky descriptions.
What a help it would be too if the packet had a picture printed on it or
in it. So often you have used all in the packets for a trial assembly and
on reassembly have to work out what they all were again.
Better still if a database was delivered with the kit we could find out
what each bit was and where it is used, and at least all the pc owners
would find life easier. If Europa won't do it maybe there is a builder
with time to spare to do it from the manual - but that's undoubtedly a
contradiction in terms.
gemin
|