Hi Jon, Military grade hardware is prohibitively expensive - but you won't get better. RS and Farnell used to supply these Amphenol connectors but I suppose the demise of our defence industry means t
Jonathan, I think you have provided the answer to your own question. The fact that you have run your Classic with no engine offset and noticed no asymmetric flying characteristics speaks volumes. The
Hi Bud, Another gem of a post that will be copied into my burgeoning "Bud's Tips" folder. I agree with nearly all of what you say but as is always the case; a good explanation prompts another questio
Hi Pete, I have read both. I've also seen cowlings that have had their firewall face trimmed to allow the aperture to align with the propeller hub. As you say "it was a bit crude but seemed to work".
Rowland, sadly Stefan has ceased producing his excellent silicon hoses and his ads will shortly disappear from the Europa Flyer. Nigel Read this topic online here: http://forums.matronics.com/viewtop
If you haven't discovered it yet, that font of all Europa knowledge - The Europa Club Website has a good explanation of the differences: http://www.theeuropaclub.org/wp-content/uploads/2011/12/Classi
Hi Kingsley, I tried emailing you directly yesterday, but for some reason it bounced. It then struck me that you might not be the only person experiencing problems and the information may be of use t
Mike, you need an 8.0 mm hex. If you need to buy the tool, look for one with a spherically ground tip - it will allow you to tighten the hex head Allen bolts --From a slight angle (up to about 10 deg
Phil, The clearance relates to the distance between the shank of the bolt and the outboard end of the slot in OR5. When deploying the flaps, they move slightly beyond their resting position to enable
Clive, you could always donate it to the Europa Club Tools loan scheme. We stock a range of specialised tools and equipment that the average builder/owner could not justify purchasing. I just happen
It looks like the weather might play ball this weekend for the club AGM at Popham. https://www.flyer.co.uk/weather/ I was planning on staying over on Saturday evening to have a few beers and had deci
https://www.flightradar24.com/BOE004/e54ad6b Nigel .......... if it makes no sense, zoom out! Read this topic online here: http://forums.matronics.com/viewtopic.php?p=471464#471464
[quote="pjeffers@talktalk.net"]Probably a proving flight????? It was. ...... or it could be next generation rapid prototyping ;-) Pretty impressive I thought. http://www.bbc.co.uk/newsbeat/article/40
I think I can help you out there! I'll get one in the post to you tomorrow. Nigel Read this topic online here: http://forums.matronics.com/viewtopic.php?p=471935#471935
Dear All, Im pleased to be able to announce that the Europa Clubs much vaunted new website went live this afternoon. www.theeuropaclub.org We have listened to your criticism and attempted to address
I have attached a copy of the Skyworld Installation instructions. These include the plug wiring. This may be what you are after. Nigel Read this topic online here: http://forums.matronics.com/viewtop
Not sure which standard your aircraft needs to comply with, but CS-VLA contains some "common sense" advice on propeller clearance. CS-VLA 925 Propeller clearance Unless smaller clearances are substan
Karl, So what then is the required clearance for the trigear ? My 2-blade Woodcomp is 69.5 inches with a ground clearance of 10 inches. Cheers, Karl To test for 1.5g worst case, let the tyres down, l