Author: Graham Singleton <grahamsingleton@btinternet.com>
Date: Thu, 19 Jul 2007 23:30:14
Carl I could be corrected too but imho because the rest of the pitch control system only moves fore and aft it won't influence balance, so I would think balancing disconnected is OK. The rest of syst
Author: Graham Singleton <grahamsingleton@btinternet.com>
Date: Thu, 19 Jul 2007 23:48:05
Raimo there was a very good repair company at Leeds airport, Yorkshire Light Aviation. The engineer who did the checks was required to go on the first test flight. I always thought that was a good pr
Author: Graham Singleton <grahamsingleton@btinternet.com>
Date: Tue, 24 Jul 2007 00:09:54
Jim does the Dynon use the 60deg. hole as static? or does it have two pitots and a static.? Graham -- Graham Singleton Tel: +441629820187 Mob: +447739582005
Author: Graham Singleton <grahamsingleton@btinternet.com>
Date: Wed, 25 Jul 2007 23:38:20
Niels This mod is one that most of us wish we had done, unfortunately it isn't easily retro fitted. Graham -- Graham Singleton Tel: +441629820187 Mob: +447739582005
Author: Graham Singleton <grahamsingleton@btinternet.com>
Date: Thu, 26 Jul 2007 22:57:17
Jos I think there are a lot of people on the forum who still don't realise how much you have done for the Club. There aer those who do though so "never give up!" Graham and fly safe! i ever heard of
Author: Graham Singleton <grahamsingleton@btinternet.com>
Date: Tue, 7 Aug 2007 10:53:22
Troy that is the wise decision, (put in both mods together) (imho!) Without the articulating sockets the pins would still see some bending loads, which I don't feel happy about. You only have to hit
Author: Graham Singleton <grahamsingleton@btinternet.com>
Date: Tue, 7 Aug 2007 20:29:05
Bob well, you can always go to the canard fly in end of the month! That was the inspiration for this one Graham to be there for your entire presentation. Unfortunately, I have to be on an airliner fo
Author: Graham Singleton <grahamsingleton@btinternet.com>
Date: Wed, 8 Aug 2007 00:58:44
Bob imho the best type of vacuum pump is one that sucks electrons through a lump of silicon and displays the resulting confusion on a screen! Weighs less and doesn't pack up quite so regularly! Graha
Author: Graham Singleton <grahamsingleton@btinternet.com>
Date: Thu, 9 Aug 2007 00:44:11
Niels those gear legs are not too difficult to bend. You could jack it out a few mm. then squeeze it back in th fiut the wheel with a block of wood where the tire touches to hold the gap at that poin
Author: Graham Singleton <grahamsingleton@btinternet.com>
Date: Fri, 10 Aug 2007 00:14:59
WD40 is definitely not a substitute. It degrades over a few months then causes abrasion or corrosion or both, (as I understand, it degrades to silica in some circumstances, particularly in electrical
Author: Graham Singleton <grahamsingleton@btinternet.com>
Date: Fri, 17 Aug 2007 00:42:49
Raimo the thing that will catch you out is overconfidence. Never forget that all taildraggers are unforgiving of faulty or careless landing technique. All airplanes are unforgiving of bad decisions a