Dear Mr. Wilson, Recent postings on the Europa-matronics webchat are deteriorating into chaos and a noted lack of civility in the absence of a definitive statement from Europa management on the curre
Two more cents worth: I've also had bad experience with a Michael Engineering pump. I've found the balance shown in the Manual to be quite satisfactory, the original sketch of which was done by Ruta
Hi All, I'm missing my windshield and windows, and now that I have some time before the issue can be dealt with, I'm looking for some advice and counsel as to whether to go clear, bronze, or grey tin
Well...thank you All! Clear it is (for me, anyway) as I recall trying my Sun Tiger blue-blocker sunglasses at night...they didn't stay on very long! Fred A194
Hi All, This thread seems to be going in ever-decreasing circles...and knowing absolutely nothing about the intricacies of the system (I'm happily and sheepishly just starting on the wings chapter),
Hi Fred F., Sorry to hear of your situation. The question in my mind is whether you're dealing with deformation or shrinkage (?). Perhaps a call to a techie at Roehm & Hass might be useful. (?) I'm c
$.02 worth of comment, unfortunately of no help to Dave: I'm most sympathetic with anyone who experiences recurring engine problems; Dave's appears (to me) to be another of a long string of complaint
Hi All, I have inadventantly cooked a can of resin and hardener overnite at a temperature which was reading 100 degrees F. this morning. Any thoughts on whether or not I should or must throw it out?
Hi All, Ah...the freedom of communication...and yet how troublesome...especially when someone takes upon himself the duty to speak on behalf of others, as in As one who is missing paid-for and as yet
Bob, Checking pg 3088 of McMaster catalogue I find part # 90293A415 which is a "T" handle pip pin of 1/2" Dia. of 31/2" grip range at$29.30 ea. Fred A194
To All: To sum up, looking at McMaster-Carr catalogue pg. 3088, you find a picture of the aluminum "T" handle type "G" quick release pin; this APPEARS to be EXACTLY like that supplied w/ kit. Going t
David, I am a bit confused at what you describe...any chance that you could post a picture of the pin and the "inserter/extractor"? Fred A194 David Joyce G-XSDJ
Hi All, In re-reading my posting of yesterday, I find an error which I would like to correct as follows: What I intended and should have written was: "looking at McMaster-Carr catalogue pg. 3088, you
All, Point well taken! With respect to those in the McMaster-Carr catalogue, there is no mention of limitations on intended use; however, there is extensive information on structural qualities of th
Specs on the Jabiru show 107hp @ 2750 rpm & 120hp @ 3300...this strikes me as a bit high for optimum propellor efficiency (?). Comments anyone? Fred A194
Bob, Thanks for your efforts on all our behalfs. Seems I recall some postings related to using two pip pins rather than the one supplied + the "bolt with a handle". Is there some consensus or factory
All, John Hurst has opined that the Araldite 420 exp. date can be taken with a grain of salt; does anyone with some specific expertise concur? Fred A194