Hi Jonathan, Iv just pm'ed you. I plan to install a 914 turbo engine and I believe that it only uses electric pumps (2 off) so this shouldn't affect me. Anyone else on here who has a classic with cla
Hi Bruno, Frank Xuereb here. If you could get him to share his findings, installation and post some pictures that would be of great help. As for the XS wings......you can buy a full XS kit second han
Are there any user's on this forum who fly a classic with the original classic cowl's and a Rotax 914 engine? If so how much modification did it take, do you suffer over heating problems due to the c
Hello all. Well i have just installed the bungee to the landing gear frame and the whole thing retracts into the wheel well lovely, however i cant put it back down again using the lever.....its just
Hi Erich, thanks for the reply. Yes the cowls or the bearer frame needs modifying in order to get the 914 with turbo under the cowls. Because of the 4" forward and 1.5" hight difference the XS cowl w
44 views and only 1 reply....sort of answer my question. XS cowls it is then Read this topic online here: http://forums.matronics.com/viewtopic.php?p=429170#429170
Dont have much time today so decided to have a good clean up and mop in the workshop but before i started i loosened the bungee cord and was able to move the landing gear up and down when standing ou
Ahh the voice of experience Graham, I like it! The problem was, was that the bungee was way too tight. The reason for this is that I was looking at the way the bungee was used on the tri gears before
Hi Alan, you can download the manual from the europa website.....FREE. You can then reverse the process to remove and replace the faulty item Read this topic online here: http://forums.matronics.com/
Hi Brian. Well I for one can't wait for your technical letter out lining what is acceptable or required as I am putting off buying my panel at the moment so that I can build a fully accepted IFR fit
Hi Kevin. I too have just finished fitting the wing pin sockets. I'm not near my aircraft at the moment as I am away on holiday and so can't check how much movement, if any, there is but the question
Had a look on their site but couldn't see them. Can you post a link please, many thanks Frank Read this topic online here: http://forums.matronics.com/viewtopic.php?p=430517#430517
Hi Tony, welcome to the fountain of knowledge! Im building a classic kit and haven't come across anything that looks like your photo, sorry. When it comes to building your wings take a look at europa
I have installed 2x dynon servo's. I got brackets fabricated for my install into my classic mono. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=430631#430631
Hi Alan. I'm building at the moment. Haven't boned on the top yet so have good access to bottom fuselage for visuals. Also I have a spare fuel tank and plenty of photos of my build which may be of us
Hello all. I am building a classic mono and am fitting the tail wheel at the moment. I am also using the XS stern post instead of the classic build option. Today i drilled the hole in the stern post,
Thanks Alfred but thats a bit drastic to start again. All can be corrected its just which is the best way forward Read this topic online here: http://forums.matronics.com/viewtopic.php?p=433392#43339
Hello all. I am wanting to meet any builders in the kent area, as I'm in kent, to chat europa, share ideas and show off their builds thus far. I am currently 2 years into my classic build and just ab