- 1. Grease Fittings (score: 1)
- Author: TroyMaynor@aol.com
- Date: Sun, 19 Sep 1999 14:52:53
- Hi Folks, I'm trying to think of everything I need to do before putting the top molding on. One thing that came to mind was grease fittings for the pitch torque tube bushings. I heard that someone ha
- /europa_forum//html/europa-list/1999-09/msg00008.html (7,363 bytes)
- 2. Re: Grease Fittings (score: 1)
- Author: Kenneth S. Whiteley <ken@kenwhit.demon.co.uk>
- Date: Thu, 23 Sep 1999 23:40:26
- Are we talking about the aileron torque tubes and their Tufnol bushes? I fitted grease nipples to these before installing them in the cockpit module. In the case of the forward bushes there is not en
- /europa_forum//html/europa-list/1999-09/msg00047.html (8,372 bytes)
- 3. RE: Grease Fittings (score: 1)
- Author: Plantragg Developments <ptag.dev@ukonline.co.uk>
- Date: Fri, 24 Sep 1999 20:16:10
- A pooling of local brains resulted in me drilling a hole through the seat backs, just large enough to be able to redux an aerosol tube into the tufnol bearing ,similaly such a small diameter hole in
- /europa_forum//html/europa-list/1999-09/msg00051.html (9,571 bytes)
- 4. Re: Grease Fittings (score: 1)
- Author: TroyMaynor@aol.com
- Date: Fri, 24 Sep 1999 17:52:44
- Hi, Sorry, I should have went out and looked at the book. I was actually referring to the bushings in the tail plane torque tube. I was trying to figure out if traditional grease fittings (or zert fi
- /europa_forum//html/europa-list/1999-09/msg00052.html (7,109 bytes)
This search system is powered by
Namazu