Hi there, Are you using Evans? I have just had to change my Radiator Hoses after 150 hours using Evans - it seemed to soften them and developed a leak on the ends - tightening the clips didn't achiev
No, I don't use Evans, but I think its perhaps time to change the hoses, and fit the new clamps from rotax. Hi there, Are you using Evans? I have just had to change my Radiator Hoses after 150 hours
Leaking problems here too. As long as the engine is warm, not a drop. If i don't use the engine heater, there will be a few drops. Seems to be a problem caused by different expansion ratios. The trad
Hi Jos "Anyboby with a source and or partnumber for 25 mm spring hose clamps?" I am not a tremendous fan of hose clamps that hold a constant dimension on something that heats up and cools down. If yo
Hi Jos I used Vauxhall/Opel/GM Part number 90572595 spring clamps, I have used Silicone hoses on my 914 which are slightly thicker than the stock Rotax hose, But these clips are suitable for both typ
Thank you guys for the rescue. Because i have a very non-standard cooling system, i had to make connections from different pieces of hose. It looks like a patch blanket :-) As a result there are a lo
Hi Jos I just remembered taking a look at using heat shrink for sealing hose connections: http://www.gates.com/brochure.cfm?brochure=1020 Never got samples. Perhaps I saw that McMaster sells?? If you
Ron P: I followed the discussion and found solace in spring band clamps per McMaster-Carr page 252 bottom, and the pliers suggested thereto. Is this what the conference is on? I have to move the two
Hi Ferg " I followed the discussion and found solace in spring band clamps per I didn't yet do final install of 914. When I had it hung temporary, I ordered clamps I thought I would need. Will use sp
Author: Robert C Harrison <ptag.dev@tiscali.co.uk>
Date: Mon, 31 Mar 2008 08:43:35
Hi! Ferg/Ron/all Courtesy Ivor Phillips I've used the same spring clamps which are Vauxall motor parts. However I also used the "remote applicator" from Halfords which I found needed a slight lip up