Hello all, I'm just getting started on the building and, in between drying sessions, I would like to start cleaning/treating the metal parts. If anyone has any recommendations as to the best way to r
All: There has been quite a bit of discussion on "how to provide adequate ventilation" in the Europa. Some of them have been very ingenious but seem to require a fair amount of extra work. The Aircra
Dear Tri-gear builders: Has anyone found a good place to install the brake pedals? I tried installing them per the manual directions but found that it didn't leave any room for my feet. (OK, no remar
Martin, Congratulations! You might want to contact Dennis Vorhees who has designed a seat for his daughter (now about 5 or 6 years). You will have to phone him (he's on the builders list) since he do
Christopher , According to the Builders list, here is the info you requested: David Deford, 2143 Foxswallow Rd, Pleasanton, CA 94566-5550 'phone 925-484-2398, Email davedefore@home.com Regards, Dale
Hi Steve, I purchased a Falcon (Wultrad) Attitude Indicator and now awaiting the third replacement. All of them drifted badly when I did a bench test. I am now told that they have located another bea
Paul, I'm about at the same stage that you are and had the same problem. I simply cut some of the top off of the baggage bulkhead and was then able to tip it forward a bit to give the necessary clear
Kevin, I had the same dilemma so I called the manufacture of my Perspex. He essentially said it was OK to cut a hole almost anywhere and the hole size was not critical. I'm using the 3 1/4" "Snap Ven
Hi David, Sorry I missed you on your visit to beautiful Fallbrook. Yes, we fly out of both the Fallbrook Air park and French Valley (Murieta). The next time your down this way, give me a call and we'
Dave, I just finished spraying the control surfaces with Polyfibers "Top Gloss" and I'm very pleased with the results. Like you, I used their UV Smooth Prime with similar good results. The only minor